Faucet repair in Houston, for drips that will not stop

Faucet repair in Houston is the work of finding the worn cartridge, seat, supply line or shutoff valve and testing the faucet after. A dripping faucet wastes water during business hours and wears the fixture from the inside. El Primo Lalo Plumbing repairs kitchen and bathroom faucets in Houston, usually in one visit: a cartridge, a seat, a supply line or a shutoff valve, diagnosed first and tested after.

plumber for Houston homes
  • Dripping faucets
  • Cartridge and seat
  • One-visit repairs
  • Written scope firstYou approve the price before we start
  • Tested before we leaveEvery repair gets a pressure or flow test
  • Parts on the truckCommon fittings stocked for one-visit repairs
  • Clean work areaWe haul away old parts and debris

What Our Faucet Repair Includes

Every faucet repair includes diagnosis, the repair itself, and a test before we leave. Here is what is covered on a standard call and what we quote separately if we find it.

  • Full Fixture DiagnosisWe open the faucet and inspect the cartridge, seats, O-rings, and supply lines. We check water pressure at the fixture and look for corrosion at the base. Diagnosis takes 15 to 30 minutes and is part of the quoted repair price.
  • Cartridge and Seat ReplacementThe most common faucet failure is a worn cartridge or a scored valve seat. We replace the failed part with a matching component for , , , or standard fixtures. Standard replacements take 30 to 60 minutes.
  • Supply Line and Shutoff CheckWe check the supply lines and shutoff valves under the sink. A seized shutoff valve or a cracked supply line is a common secondary issue. If we find one, we quote the repair separately before doing the work.
  • Hot and Cold Run TestAfter the repair, we run the faucet hot and cold and check for drips at the spout, the base, and the supply connections. The job is not finished until the fixture is dry under pressure.
  • Cleanup and Parts RemovalWe wipe down the work area and take the old parts with us. You get a short summary of what failed and what we replaced, so you have a record for your home files.
Faucet Repair
Plumbing services in Houston | El Primo Lalo Plumbing

Faucet repair for homes

We repair kitchen, bathroom, utility, and shower faucets in houses and condos across Houston. Every visit includes a supply line and shutoff valve check so the fix holds.

  • Kitchen pull-down faucets
  • Bathroom lavatory faucets
  • Shower and tub valves
  • Utility sink faucets

Faucet repair for businesses

We repair faucets in restaurants, offices, retail spaces, and multi-unit properties with minimal downtime. Scheduling works around your business hours and tenant access.

  • RestaurantsUtility and hand sink faucets repaired fast
  • OfficesBreakroom and restroom fixtures kept working
  • RetailCustomer restroom faucets repaired with little disruption
  • Multi-unitTenant faucet calls handled in scheduled batches

Faucet Repair in Houston: Small Part, Big Difference

A faucet drip is almost always a cartridge or a seat. Hard water, about 8 grains per gallon on average in Houston, scales cartridges and wears seats, so drips are one of the most common repair calls in the city. A stiff handle, a leak at the base, or water under the sink point to different parts: the handle mechanism, the base seal, or the supply line and shutoff valve.

Repair beats replacement when the fixture body is sound. A cartridge swap, a new seat, a supply line or a shutoff valve costs far less than a new faucet and takes one visit. Replacement is the answer when the body is cracked, corroded through, or parts are no longer available. We show you the failed part so you can decide.

A drip is a worn part talking. Replace the part and the drip stops.

How Our Faucet Repair Service Works

Every call follows the same five steps, whether it is a kitchen faucet in Bellaire or a bathroom fixture in a Medical Center high-rise. Here is what you can expect from the moment you call.

  1. Book the Call

    Book the Call

    Call (346) 776-8560 or book online. Tell us the fixture type, the symptom, and how long it has been happening. We confirm a window, usually prompt for standard repairs, and text you when the technician is on the way. Most calls are scheduled within a two-hour arrival window.

  2. Diagnose the Fixture

    Diagnose the Fixture

    The technician shuts off the shutoff valves, opens the faucet, and inspects the cartridge, seats, O-rings, and supply lines. We check water pressure at the fixture and look for corrosion at the base. Diagnosis takes 15 to 30 minutes on a standard faucet.

  3. Quote Before We Start

    Quote Before We Start

    You get a written price for the repair before any work begins. If we find a second issue, like a failing shutoff valve or a cracked supply line, we quote that separately and you decide. No work happens without your approval on the price.

  4. Complete the Repair

    Complete the Repair

    We replace the failed components, reseat or replace the valve, and reassemble the faucet. Standard cartridge swaps take 30 to 60 minutes. Jobs that involve a corroded valve seat or a seized shutoff valve can run 90 minutes. We use brass fittings and Teflon tape on threaded connections.

  5. Test and Clean Up

    Test and Clean Up

    We turn the water back on, run the faucet hot and cold, and check for drips at the spout and under the sink. The work area gets wiped down and the old parts go with us. You get a summary of what failed and what we replaced before we leave.

Tools and Methods We Use

  • Plumbing services in Houston

    Pipe wrench

    Used to loosen and tighten supply connections and shutoff valves under the sink without damaging the fitting.

  • Plumbing services in Houston | El Primo Lalo Plumbing

    Tube cutter

    Cuts copper pipe cleanly when a supply line or stub-out needs replacement during a faucet repair.

  • Plumbing in Houston

    Propane torch

    Used for soldering copper pipe connections when a supply line repair requires a new section of pipe.

  • Plumber at work in a Houston home

    Press fitting tool

    Makes copper and PEX connections without solder when a supply line needs a fast, clean repair.

  • Careful professional plumbing work in Houston

    Leak detection microphone

    Finds hidden leaks in walls or under slabs when a faucet problem traces back to a line leak.

  • Camera inspection before we dig

    Sewer camera

    Inspects drain lines when a faucet repair reveals a slow drain that points to a deeper blockage.

  • Plumbing in Houston | El Primo Lalo Plumbing

    Uniform Plumbing Code compliance

    Every repair follows the Uniform Plumbing Code as adopted locally. That covers supply line sizing, shutoff valve placement, and backflow protection on fixtures that require it.

  • Plumbing parts and tools on hand

    Cartridge matching by fixture brand

    We match the replacement cartridge to the fixture brand and model, using , , , and standard parts. A mismatched cartridge is a common cause of repeat leaks.

When to Call for Faucet Repair

  • A kitchen faucet in a 1950s Heights bungalow starts dripping after decades of service.

    We inspect the fixture and the galvanized supply lines feeding it. If the faucet is repairable, we replace the cartridge and seats. If the supply lines are corroded, we quote a line repair alongside the faucet fix. The homeowner gets a dry faucet and a clear picture of the supply line condition, usually in one visit.

  • A River Oaks homeowner notices water staining the cabinet base under a bathroom sink.

    We trace the leak to the faucet body or supply connection, repair the failed part, and check the shutoff valves. We test under pressure before we leave. The cabinet stays dry and the homeowner avoids a cabinet replacement.

  • A property manager in the Medical Center needs three bathroom faucets fixed before a tenant move-in.

    We schedule a single visit, bring cartridges for the common fixture brands, and repair all three faucets in one trip. We leave a written summary of parts replaced. The units are ready on schedule and the manager has a record for the property file.

  • A Clear Lake homeowner has a shower valve that drips constantly and a stiff handle.

    We replace the shower valve cartridge, clear the mineral buildup, and test hot and cold flow. If the valve body is cracked, we quote a valve replacement. The drip stops and the handle turns smoothly again, usually within a two-hour visit.

How Faucet Repair Works in Houston

Hard water scales cartridges everywhere in Houston, and older fixtures in the Heights, Montrose and River Oaks wear first. Kitchen faucets work hardest, so they drip first.

  • The HeightsOlder bungalow fixtures where cartridges and seats have worn through decades of hard water.
  • MontroseBungalow kitchen and bath faucets; cartridge swaps are the daily call.
  • River OaksLarger kitchens with high-use faucets that drip first and wear fastest.
  • MemorialFamily kitchens where the faucet runs all day and the cartridge wears first.
  • Garden OaksMid-century fixtures where a seat or cartridge is the fix, not a new faucet.
  • Hard waterAbout 8 grains per gallon on average, so scale builds in cartridges, aerators and valves.

From problem to finished result.

  • Kitchen Faucet Drip in the Heights

    Before

    A homeowner in the Heights had a kitchen faucet that had been dripping for months. The cabinet base was swelling and the shutoff valve under the sink was seized. The faucet was a single-handle unit with a worn cartridge.

    After

    We replaced the cartridge and the seized shutoff valve in one visit. The drip stopped completely, and the cabinet base dried out over the following week. Total time on site was about 90 minutes.

    We recommended running the faucet hot and cold weekly and checking under the sink for moisture once a month. A cartridge replacement every few years is normal in Houston's hard water.

  • Bathroom Faucet Leak in Bellaire

    Before

    A Bellaire homeowner noticed water staining the cabinet base under a bathroom sink. The faucet was a two-handle fixture with a cracked valve seat. The supply line was also starting to weep at the connection.

    After

    We replaced the valve seat and the supply line, then tested under pressure. The cabinet stayed dry, and the homeowner avoided a cabinet replacement. The repair took about an hour.

    We suggested checking the supply connections every six months and replacing the supply line if it shows any cracking. Hard water speeds up wear on these parts.

  • Shower Valve Drip in Clear Lake

    Before

    A Clear Lake homeowner had a shower valve that dripped constantly and a handle that was stiff to turn. Mineral buildup had seized the cartridge, and the valve body was still in good condition.

    After

    We replaced the cartridge, cleared the mineral buildup, and tested hot and cold flow. The drip stopped, and the handle turned smoothly again. The visit took under two hours.

    We recommended a water softener to reduce mineral buildup and extend the life of the valve. A cartridge replacement every few years is typical in this area.

Faucet Problems We Fix in Houston

Most faucet calls fall into a handful of failure types. Here is what we see most often and how we handle each one.

  • Faucet drips constantly at the spout

    Faucet drips constantly at the spout

    We replace the cartridge or reseat the valve, whichever has failed. Most constant-drip repairs finish in under an hour, and the drip stops completely once the new part is in. A steady drip wastes thousands of gallons a year and stains the sink basin. It also keeps water on the valve seat, which speeds up corrosion and can lead to a bigger leak inside the wall.

  • Water pools under the sink after use

    Water pools under the sink after use

    We trace the leak to the faucet body, supply line, or shutoff valve and repair the failed connection. We use brass fittings and Teflon tape on threaded joints and test under pressure before we leave. Water under the sink rots the cabinet base and can spread to the floor. Left long enough, it damages the subfloor and invites mold. Most under-sink leaks have been running for weeks before anyone notices.

  • Faucet handle is stiff or will not turn

    Faucet handle is stiff or will not turn

    We disassemble the faucet, clear the mineral buildup, and replace the cartridge if it is worn. Houston's hard water causes this often, and a new cartridge restores smooth operation. A seized handle usually means mineral buildup or a failing cartridge. Forcing it can crack the valve body and turn a simple repair into a fixture replacement.

  • Low water pressure at one faucet

    Low water pressure at one faucet

    We clean or replace the aerator, check the cartridge, and test flow. If the problem is in the supply line, we repair or replace the section so pressure returns to normal. A single fixture with low pressure usually points to a clogged aerator or a failing cartridge. Ignoring it can lead to a full loss of flow at that fixture.

A dry fixture, a tested repair, and a record of what was replaced.

  • Stop the Water Waste

    A single dripping faucet can waste over 3,000 gallons a year, and a running toilet adds thousands more. We replace the failed cartridge or seat so the flow stops completely. You see the difference on your next water bill, usually within one billing cycle.

  • Protect Cabinets and Counters

    Water that drips under the sink rots the cabinet base and warps countertops. We trace the leak to its source, whether it is the faucet body, a supply line, or a shutoff valve, and fix it before the damage spreads. Most under-sink leaks we see have been running for weeks.

  • Prompt Appointments

    We schedule faucet repair Houston appointments during our hours — Monday through Sunday, 7:00 AM to 10:00 PM — and we call ahead with a real arrival window. A technician arrives with the common cartridges and supply lines already on the truck, so a standard kitchen or bathroom faucet is usually back in service in under two hours.

  • Written Estimate First, No Surprises

    You get a price before we turn a wrench. faucet repair Houston Texas does not mean cheap parts. We quote the repair, explain what failed, and let you decide. If the fixture is beyond repair, we tell you that too and quote a replacement instead.

What you receive

Clear records you can keep and share.

Written summary

What failed and what we replaced

Pressure test

Hot and cold run before we leave

Parts record

Brand and model of the replacement part

What homeowners should know about faucet repair

A dripping faucet is usually a worn cartridge or a scored valve seat, not a reason to replace the whole fixture. Knowing which part failed helps you decide between repair and replacement.

  • Cartridge vs. seat

    A cartridge controls flow and temperature on most single-handle faucets. A valve seat is the surface the cartridge seals against. Either one can fail and cause a drip.

  • When to replace

    If the faucet body is cracked or the finish is failing, replacement is usually the better value. A repair on a failing fixture often leads to a second call within a year.

  • Hard water effect

    Mineral buildup scores valve seats and seizes cartridges faster. A water softener reduces the buildup and extends the life of every faucet in the house.

Local service area

Plumbing coverage in Houston

Outside these areas? Call and ask if we can reach you. (346) 776-8560

What Houston Customers Say

  • I can't say enough about their service. They are prompt and responsive to questions. Attentive to cleaning up afterwards and wear shoe covers. Prices are good and he helped me choose compatible replacement faucet and garbage disposal. which I ran out and picked up while he did other repairs. Fransisco is such a kind person and my elderly mom has been so pleased.
    Ann BogranGoogle review
  • Excellent customer service and the best prices!! I highly recommend them! They came out in less than an hour and fixed everything quickly.
    Ana AlvarezGoogle review
  • Great work done to perfection! And a great price.... give them a call
    Matthew MiertschinGoogle review

Faucet Repair Questions Houston Homeowners Ask

Still wondering? (346) 776-8560

Local service team

Book Faucet Repair in Houston

Call (346) 776-8560 for a free estimate. We find the worn part, replace it, and test the faucet before we leave, Monday to Sunday, 7:00 AM to 10:00 PM.

Contact El Primo Lalo Plumbing

Call us at (346) 776-8560 to book faucet repair or ask a question. We are open Monday to Sunday, 7:00 AM to 10:00 PM, and estimates are free.

Call to book

The fastest way to book is a phone call. Tell us what is happening and we will give you a free estimate and a time that works, Monday to Sunday, 7:00 AM to 10:00 PM.

Open Mon–Sun, 7:00 AM–10:00 PM. Free estimates.